GSX1400 Owners .org
Technically Speaking => Suspension => Topic started by: Notty on Sunday, 05 November 2017, 11:28 PM
what are the Rear shock nut and bolt sizes as I have secured funding and will be ordering my Hagon Nitro's and thought change to stainless steel ? Did try a search honest! :smile2:
Notty..
The lower bolt is M10 x 45mm
Not sure about the upper bolt.
S.
Pop to your nearest bolt factors. Place on counter - jobs a good 'un.
Quote from: Basil Brush on Monday, 06 November 2017, 04:16 AM
Pop to your nearest bolt factors. Place on counter - jobs a good 'un.
Sounds like a good idea - trouble is I only use ProBolt and its an hours drive away :smile2:
Is'nt the top one welded to the frame?
high tensile needed mate. dont use stainless in stressed areas. have a search on that.
Quote from: grog on Monday, 06 November 2017, 07:25 PM
high tensile needed mate. dont use stainless in stressed areas. have a search on that.
[/quote
Will these be ok? Titanium Hex Head M10 x (1.25mm) x 45mmThese bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. ? :smile2:
I never knew that. I just took 'em off. Popped to the local bolt factors. and asked for like for like in nice stainless. :embarassed:
Anyone know the rear shock upper bolt size please ?