GSX1400 Owners .org
Technically Speaking => Brakes => Topic started by: Speedy1959 on Monday, 18 September 2017, 10:20 PM
Hi all..
Not a fan of wavey discs so I wish to replace the rear none standard one with a decent used one.
Firstly will a K7 disc fit a K5 ok?
Also what is the thickness wear limit on a rear disc.
Thanks in advance for any responses.
S.
Rear disks off all models are interchangeable.
Tolerances are in the table below for both front and rear disks (Units shown are in mm with equivalent inches measurement in brackets)
http://gsx1400owners.org/forum_test/index.php?topic=927.0
all the same across all years
and aren't very expensive either .
you beat me to it dave :cheers:
Quote from: seth on Tuesday, 19 September 2017, 01:06 AM
http://gsx1400owners.org/forum_test/index.php?topic=927.0
all the same across all years
and aren't very expensive either .
you beat me to it dave :cheers:
Only just though buddy !!!!
Thats brilliant..
Thanks very much..
P.S I pick up the bike on Wednesday afternoon so I will actually be an owner !
S.
Quote from: Speedy1959 on Tuesday, 19 September 2017, 03:02 AM
Thats brilliant..
Thanks very much..
P.S I pick up the bike on Wednesday afternoon so I will actually be an owner !
S.
Enjoy !!!!!
When looking for replacement rear disc, I noticed that many aftermarket have an initial thickness of 5mm and minimum thickness of 4.5mm. Just something to be aware of.