GSX1400 Owners .org

Hi just wondering if there is a rear cowl conversion that can be done without cutting.
I do like the gsxr style but also cafe racer style just wondering what people have done.

i have this its a cover that just fits over the seat.
its now been colour matched to the bike but i don't have a pic of it finished yet

:cheers:

What's it off and did you have to make new fastening points.

not totally sure but think its a powerbronze seat cowl
direct fit iver the standard seat for the 14 no modifications required.
:cheers:

update it was powerbronze they are £85 on evilbay
https://www.ebay.co.uk/i/192234848070?chn=ps&dispItem=1&adgroupid=43920634520&rlsatarget=pla-359427365517&abcId=1063846&adtype=pla&merchantid=101731626&poi=&googleloc=9046863&device=m&campaignid=797602469&crdt=0&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F710-134428-41853-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.co.uk%25252Fi%25252F192234848070%25253Fchn%25253Dps%252526dispItem%25253D1%2526itemid%253D192234848070%2526targetid%253D359427365517%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9046863%2526poi%253D%2526campaignid%253D797602469%2526adgroupid%253D43920634520%2526rlsatarget%253Dpla-359427365517%2526abcId%253D1063846%2526merchantid%253D101731626%2526gclid%253DCj0KEQjw-ezKBRCGwqyK0rHzmvkBEiQAu-_-LMeosnJfvcZcjPejsmSJexSQQLs7UT-Hpx1nYYRcDMYaAihY8P8HAQ%2526srcrot%253D710-134428-41853-0%2526rvr_id%253D1249708816029

you might get it cheaper direct from powerbronze

:cheers:

Here's a thought. I have a set of moulds from when I made my own seat unit. 2 piece for the rear cowl and a mould for the seat pan .Done a 700mile round trip and the seat was far more comfortable than standard. No gel just foam over flat base. Often thought of knocking some out but could never be arsed. £500 for the lot and dimensions for the brackets for the light. Not arsed either way as I kinda like it being unique. The oven thing is just a mild heat treatment that kind of relaxes the metal

Sweet looking ride Halibag I might look at doing moulds and making my own design would you have info on how you did it.