I haven't tried swapping them over yet (so they may not fit!)
but the B-Kings risers are black, give a 65 / 70mm gap between
the bars and the yoke and are angled back a bit.
I may see if they'd fit the 1400 next time I have stuff it bits
or drop onto a cheap spare set.
(I only posted it on here because its a topic on Facebook and thought it may be of interest to someone)
(https://s8.postimg.org/ifqhexqkl/image.jpg) (https://postimage.io/) (https://certificity.com)
Cool, let us know if they fit. Could have another buyer here.
They look nice!
Just realised they have a one piece top clamp.
I'll have to check the spacing compared to the 1400.
If its different it may complicate things a little.
inform me Tony, look so nice. does that mean same hight but just back a bit?
I will have a measure of both bikes.
At a glance a little higher and further back.
Even if the spacing isn't right I have a couple of options.
Chop the center out of the top clamp or use std top clamps?
Quote from: KiwiCol on Thursday, 04 May 2017, 07:27 PM
Chop the center out of the top clamp or use std top clamps?
Both options, and I know someone who can mod the top yoke too.
If you want risers and none of that works Tony - google Rox Risers..... :onya:
to support Tony's idea, to share my experience:
I'm not tall, just 175cm, and after Installing Renthal 758 (ultra low) with standart risers, handlebar became to far away from me.
So I get Oberon angled risers, and riding position became perfect (for me)
http://www.oberon-performance.co.uk/acatalog/Oberon_Motorcycle_Angled_handlebar_risers.html
Hmm, I bought some risers and didn't end up using them. I'll drag them out and take a pic, maybe sell 'em.
i also a set, 30mm, maybe sell mine. no pull back, just higher. i didnt like them at all.