- Welcome to GSX1400 Owners .org.
|
||||||
| Next Item | ||||||
| Description: 7. put the backing plate screws back in and tighten, next put the magnet and the other wire back on, BIG TIP make sure the magnet goes in the right way, I put it in upside down the first time and when I started the bike it ran like a piece of shit, needless to say I was pretty concerned at what I had done wrong. Through a process of elimination I found what I had done and fixed it and then it ran good. 8. put the cover back on, best to use a new gasket, but in my case after removing the cover again to find out what I had done wrong I used some Loctite gasket goo on it and it looks to be sealed Stats: Total Favorities: 0 View Who Favorited Filesize: 77.4kB Height: 602 Width: 802 Posted by: gsxbarmy  Wednesday, 25 January 2017, 09:57 PMTotal Likes: 0
Image Linking Codes
|
Powered by SMF Gallery Pro
SMF spam blocked by CleanTalk