Continuing - So what did you do to your bike today...?

[northern]

@froudy
Interesting solution. I'm also struggle with decigion where to put PCV map change switch...

[VladTepes]

Is it just a standard o/off toggle switch?

In which case can anyone point me to where I could buy the appropriate PLUG to make one of these myself?
(want to do it a bit differently just for shits and giggles)

[froudy]

@VladTepes
Yes, its just an ordinary toggle on/off switch.
Not sure where you'd get the plug from, but they must be available.

[Blubber]

Is it just a standard o/off toggle switch?

In which case can anyone point me to where I could buy the appropriate PLUG to make one of these myself?
(want to do it a bit differently just for shits and giggles)

That info is on this site already.  2 different plugs depending on the year.

@VladTepes... Have you tried the search function yet? 

[VladTepes]

Smarty pants!

Yes what i mean is the actual plug itself not the whole unit. Mines a k7 so i need the later model plug but need brand and model number etc so i can buy one somewhere...

[gsxbarmy]

Smarty pants!

Yes what i mean is the actual plug itself not the whole unit. Mines a k7 so i need the later model plug but need brand and model number etc so i can buy one somewhere...

Try here Vlad https://www.corsa-technic.com/category.php?category_id=126

[V_i_c_i]

Vlad, do you need connector? Try search my topic in electrics category and do 

BR Vici

[Red Biker]

Refurbed Calipers today, completed one but on the other the previous owner had crowbarred an incorrect size dust seal which is now fu--ed so can I buy just dust seals on flea bay?

Went for a splash of colour and couldn't mask off the logo so decided to get rid

[gsxbarmy]

can I buy just dust seals on flea bay?

Assuming you just need an individual seal set for one piston:
http://www.ebay.co.uk/itm/GSX1400-K-2002-07-Front-Brake-Caliper-Piston-Seals-27mm-New-/141936091894?hash=item210c0ce2f6:m:mBiOa23t0jTxvNbiQ_x_62Q

Or are we talking about a set (why they limit the set to K2/3 is stupid, as they are the same across all models)
http://www.ebay.co.uk/itm/Front-Brake-Caliper-Seals-Set-Suzuki-GSX1400-K2-K3-01-04-/200841117216?hash=item2ec3103e20:g:JykAAOSwdG9XRIcF

[Red Biker]

Great thanks Dave, just need one of the small size

[Notty]

Did a 25mile  ride to check if my calliper cleaning expertise was ok - the bike stops much better with them cleaned and new sintered pads - down side is that my my new HealTech Gipro thinks I have no 4th gear and two first gears ! - Gear Position switch faulty?
Anyway was great to get out after the winter 

[froudy]

@Notty

Strange one with the GiPro...Try running the setup procedure again and see what happens

[Notty]

@Notty

Strange one with the GiPro...Try running the setup procedure again and see what happens

Will try that Froudy - Shows 5th gear when I am in 6th but if I tap the gearshift it then shows 6th correctly 

[gsxbarmy]

Did a 25mile  ride to check if my calliper cleaning expertise was ok - the bike stops much better with them cleaned and new sintered pads - down side is that my my new HealTech Gipro thinks I have no 4th gear and two first gears ! - Gear Position switch faulty?
Anyway was great to get out after the winter 

Just check that you have set your GiPRO up properly - mine occasionally gave the odd silly reading if I set it for 6 gears, however never had an issue at all after I set it in "L" mode and then "taught" it each gear (the instructions are in the manual)

[T 24]

I drowe 115 km with my 14, in +5 degrees temperature. Its almost summer.