k7 off a pot

[davr012]

hi guys have a gsx 1400 2008 k7 here  ..  shes started to flood a cylinder..

if i pull the plugs out and wind it over the fuel is pumping from injector out the no 3 plug hole..

ive tried every thing i can and now i have an ecu to try but that triggers the key code crap an needs programmed ..

any way round this programming thing .. or how to program it .  have hud ecu hacker but dont think thats gona work with a mitsubshi ecu..

any ideas any help or wat ever will be much appreicated

davy

[Andre]

ive tried every thing i can

And what would that be???

My first thought on this is that the #3 injector is stuck in the open position. Take one of the other injectors and place it in the #3 position. Still flooding?

[Hooli]

Easiest way around the code is use the key that matches the ECU, but it won't fit your ignition...

I'd be very surprised if it's the ECU, I'd go with Andre's idea about the injector. TBH if you unplug that injector from the loom & it still sprays fuel then you've proved the injector is faulty as the ECU can't be controlling it.

[seth]

What Andre & Hooli said 
I'd have said the same 

[grog]

I also agree, seen it before on cars.