News:

GSX1400: A Magic Carpet with a Rocket up its Arse

Main Menu

Vlad's K7 GSX1400 "Back in Black"

Started by VladTepes, Friday, 20 January 2017, 10:50 PM

Previous topic - Next topic

Eric GSX1400K3

Same, just fitted new RK chain and sprockets, std gearing 19/41. Found the front was 17, rear was std 41. Aligned and then oiled chain with VMX 75W90 gear  oil.  Just perfect.
I try to take one day at a time, however sometimes several days catch up with me at once.

KiwiCol

😎  Always looking for the next corner.  😎

grog

Eric, how do you like 19 on front? Something i thought id do next chain.

Eric GSX1400K3

I try to take one day at a time, however sometimes several days catch up with me at once.

Eric GSX1400K3

Quote from: KiwiCol on Wednesday, 05 May  2021, 04:30 PM
Std front is 18 Eric.
Ah yes right you are, 18 it is
Quote from: grog on Wednesday, 05 May  2021, 05:33 PM
Eric, how do you like 19 on front? Something i thought id do next chain.
Havent had a chance ride it yet, too much rain this side and i still need to change the engine  oil.
I try to take one day at a time, however sometimes several days catch up with me at once.

seth

With a 27 tooth front sprocket and 41 rear it revs like mad and also the Speedo reads 10mph high so at 70mph your only doing 60mph.
Standard 18 Speedo still reads high by 5pmh
I'd think that a 19 will make the bike feel very lazy on acceleration but drop the revs at cruising speed a bit and I'd guess the Speedo should read correct speed.
only a slightly modified gsx1400
oh and a standard one too

Sethbot Postwhore

Hooli

Quote from: seth on Wednesday, 05 May  2021, 09:50 PM
With a 27 tooth front sprocket and 41 rear it revs like mad and also the Speedo reads 10mph high so at 70mph your only doing 60mph.
Standard 18 Speedo still reads high by 5pmh
I'd think that a 19 will make the bike feel very lazy on acceleration but drop the revs at cruising speed a bit and I'd guess the Speedo should read correct speed.

@seth 27 tooth?  :lol: :whistling:

Eric GSX1400K3

Quote from: Hooli on Wednesday, 05 May  2021, 10:19 PM
Quote from: seth on Wednesday, 05 May  2021, 09:50 PM
With a 27 tooth front sprocket and 41 rear it revs like mad and also the Speedo reads 10mph high so at 70mph your only doing 60mph.
Standard 18 Speedo still reads high by 5pmh
I'd think that a 19 will make the bike feel very lazy on acceleration but drop the revs at cruising speed a bit and I'd guess the Speedo should read correct speed.

I think he meant 17 tooth.  And yes it revved a bit more, but not much, i think 3200 @an indicated 110kmh. worst was the speedo being out.  Now ive put it back to standard 18/41 (sorry for the typo before) i think it will be much better

I try to take one day at a time, however sometimes several days catch up with me at once.

KiwiCol

Quote from: Hooli on Wednesday, 05 May  2021, 10:19 PM
Quote from: seth on Wednesday, 05 May  2021, 09:50 PM
With a 27 tooth front sprocket and 41 rear it revs like mad and also the Speedo reads 10mph high so at 70mph your only doing 60mph.
Standard 18 Speedo still reads high by 5pmh
I'd think that a 19 will make the bike feel very lazy on acceleration but drop the revs at cruising speed a bit and I'd guess the Speedo should read correct speed.

@seth 27 tooth?  :lol: :whistling:


Seth has fat fingers!   (again or as usual . . .  :rofl2:)
😎  Always looking for the next corner.  😎

seth

 :doh:
I couldn't edit it but a 27tooth sprocket will give it a top speed if 1000 mph if you could ever get it going doubt it'd go round any corners though .
only a slightly modified gsx1400
oh and a standard one too

Sethbot Postwhore

SFC1000

Quote from: VladTepes on Thursday, 08 April  2021, 08:57 AM
OK well ordered:

Front: Metzeler ROADTEC 01SE 120/70 ZR 17 M/C (58W) TL
Rear:  Metzeler ROADTEC 01SE 190/55 ZR 17 M/C (75W) TL
Supersprox Front & Rear sprockets & EK chain (kit)
Rear Sprocket carrrier bearing
Fitting etc (Labour)

Total $1,053

:grin:

It'll feel like a new bike (kinda)

Vlad, how are you finding the Metzeler's so far?
CAUTION - My forum posts may be worth what you paid for them!

grog

Be careful what you ask SFC, He probably changed to the Kendas to save a few bucks😂

VladTepes

Quote from: SFC1000 on Saturday, 08 May  2021, 08:19 AM
Quote from: VladTepes on Thursday, 08 April  2021, 08:57 AM
OK well ordered:

Front: Metzeler ROADTEC 01SE 120/70 ZR 17 M/C (58W) TL
Rear:  Metzeler ROADTEC 01SE 190/55 ZR 17 M/C (75W) TL
Supersprox Front & Rear sprockets & EK chain (kit)
Rear Sprocket carrrier bearing
Fitting etc (Labour)

Total $1,053

:grin:

It'll feel like a new bike (kinda)

Vlad, how are you finding the Metzeler's so far?

Mate I am really happy with them.
I feel more confident on them, tip in is nice, stability feels great. No complaints at all as yet, very impressed.
Vlad's K7 "Back in Black"

As a Pink Floyd fan, I get annoyed when I see vegetarians eating pudding.

YouTubeLandyVlad Rides

Eric GSX1400K3

Quote from: VladTepes on Monday, 10 May  2021, 10:00 AM
Quote from: SFC1000 on Saturday, 08 May  2021, 08:19 AM
Quote from: VladTepes on Thursday, 08 April  2021, 08:57 AM
OK well ordered:

Front: Metzeler ROADTEC 01SE 120/70 ZR 17 M/C (58W) TL
Rear:  Metzeler ROADTEC 01SE 190/55 ZR 17 M/C (75W) TL
Supersprox Front & Rear sprockets & EK chain (kit)
Rear Sprocket carrrier bearing
Fitting etc (Labour)

Total $1,053

:grin:

It'll feel like a new bike (kinda)

Vlad, how are you finding the Metzeler's so far?

Mate I am really happy with them.
I feel more confident on them, tip in is nice, stability feels great. No complaints at all as yet, very impressed.

Thats pretty good for just sitting on the bike in the garage hey Vlad?   :stir:
I try to take one day at a time, however sometimes several days catch up with me at once.

VladTepes

Vlad's K7 "Back in Black"

As a Pink Floyd fan, I get annoyed when I see vegetarians eating pudding.

YouTubeLandyVlad Rides

SMF spam blocked by CleanTalk