Power Commander PC-V Grounding

[Maveric]

So I modify PC V wiring harness and take out TPS wire on the same place as ground.



And connect TPS direct to ECU. Now just fit some 2 PIN connector to PC V and to ECU. 

Nice 
I bought a extra connector (male and female) as the one that connect the Tps to the main wiring and solder in the wire there so i easy can remove it from the bike if needed.
Cheers Maveric

[Maveric]

Maybe i shoud se if i can do a new write up of how to mount a PCV on our bike as the one i did at the old org .
See if i can this weekend now that i have found all the pic's and maybe take some new one's.

Cheers Maveric

[V_i_c_i]

Maybe i shoud se if i can do a new write up of how to mount a PCV on our bike as the one i did at the old org .
See if i can this weekend now that i have found all the pic's and maybe take some new one's.

Cheers Maveric

Can send more photos if you want. Including bracket for PC V and Autotune and connecting autotune too. But now I wait for connectors to finish my job.

[V_i_c_i]

And show us your AFR table would be good topic too. 

[seth]

Maybe i shoud se if i can do a new write up of how to mount a PCV on our bike as the one i did at the old org .
See if i can this weekend now that i have found all the pic's and maybe take some new one's.

Cheers Maveric

yes please maveric this would be very very useful

seth 

[Maveric]

Started to do a complete write up on mounting a PCV on our bikes but i cant find all my pic's how i mounted mine so i will go out next weekend and take some shoots of that plus connect my PCV to the computer to show the afr tables to .
But those that have a PCV mounted can you send me pic's of how you have mounted yours so i can show different types of doing it in the write up, V_I_C_I for example your mounting bracket, lambda position or other things.
You can send them to   magnus.sn.el@gmail.com  and i will put all info and hopefully make it easyer for all to do the same as we have done .

Cheers Maveric

[V_i_c_i]

Started to do a complete write up on mounting a PCV on our bikes but i cant find all my pic's how i mounted mine so i will go out next weekend and take some shoots of that plus connect my PCV to the computer to show the afr tables to .
But those that have a PCV mounted can you send me pic's of how you have mounted yours so i can show different types of doing it in the write up, V_I_C_I for example your mounting bracket, lambda position or other things.
You can send them to   magnus.sn.el@gmail.com  and i will put all info and hopefully make it easyer for all to do the same as we have done .

Cheers Maveric

I will do it over weekend. 

[V_i_c_i]

Done Mav, check email.

BR Vici

[Maveric]

And got the email  .

Start tomorrow to finish the write up as i'm home with a injured shoulder (not the one i smashed when i put the big girl to it's side almost 2 years ago) so i got the time to put it together and i will port it here as a new thread  .

Cheers Maveric