« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Tech Tip: Fast idle  (Read 7795 times)

Offline Eric GSX1400K3

  • Forum Donor 2022
  • Torque Master
  • *****
  • Location: Perth
  • Posts: 1530
  • Country: au
  • Total likes: 1591
  • Gender: Male
Re: Fast idle
« Reply #30 on: Thursday, 15 July 2021, 08:13 pm »
Download the manual from here, it's all explained there.  You can actuate by hand from the linkages under the throttle bodies. The primary you reach from inside the airbox
Logged
I try to take one day at a time, however sometimes several days catch up with me at once.

Offline Persizi

Re: Fast idle
« Reply #31 on: Sunday, 10 July 2022, 11:37 pm »
I did everything as expected. I adjusted the STP resistance - 0.8Kohm on fully closed secondary throttle.
On a warm engine with agusted rpm to ~1100, I adjust the resistance of the TP to 1.1Kohm.
Then I tried to set up the fast idle but max voltage that I get is 1.15V with fully open secondary throttle valve. What I do wrong?
Logged
Pages: 1 2 [3]   Go Up
« previous next »
 

SMF spam blocked by CleanTalk