Diameter of crud protector please

[Speedy1959]

Hi All

Can anyone tell me the outer diameter of the top of the fork tube, where the crud protector sits?
The Suzuki one is a bit bigger than the one one on my Honda so if the diameter is the same I was thinking of putting Suzuki ones on..

The part I am on about is number 23 on here..

https://www.fowlersparts.co.uk/parts/5290344/gsx1400-k6-zk7-06-07/front-fork-damper

S

[seth]

I have a set of forks in mid strip down so will measure later this afternoon .

[seth]

@Speedy1959
It looks like it's 64mm I.d.
The protector bit is 52mm wide at the bottom and 44mm at the top .
It's 58mm from the level of the forkseal cover of that makes sense and a total of 80mm high.
Hope this helps buddy.

[Speedy1959]

Seth
My actual fork diameter where the crud protector goes is 63mm
What's the alloy diameter on your fork leg?

Thanks once again for your expertise (even though I have a Honda).

S

[black14]

@seth Fork leg where the protector goes is 65mm.

[Speedy1959]

Thank you black14
Much appreciated.
S

[seth]

@black14 I remessured with a vernier and it cam in at 64.2mm

[black14]

@seth K5 on 65mm - measured with vernier also.
There is a groove in the fork leg where the protector goes - I didn't measure that...