Author Topic: Wanted Wanted Clutch lever  (Read 555 times)

Offline T 24

Wanted Clutch lever
« on: Friday, 27 May 2022, 04:14 pm »
Wanted original style clutch lever.
It doesn't have to be perfect, it can be slightly damaged, I will modify it anyway.
I'll try to make it easier to use for my damaged left hand.

Offline grog

  • Forum Donor 2022
  • Needs to get out more
  • ******
  • Location: landsborough
  • Posts: 6478
  • Country: au
  • Total likes: 6084
  • Gender: Male
  • If we werent all crazy, we would go insane.
Re: Wanted Clutch lever
« Reply #1 on: Friday, 27 May 2022, 05:59 pm »
T24, used to cut lever into half, drill along centre of each piece, insert bronze welding rod, bend to your shape. Patch up with auto body filler, file/smooth down. Coat of paint. Worked perfectly for a custom fit lever.

Offline Tony Nitrous

Re: Wanted Clutch lever
« Reply #2 on: Friday, 27 May 2022, 06:45 pm »
I think my 14 is currently wearing my Gen-1 Busa levers.  I’d double check it as it was done a while back and my memory isn’t great, but there’s a lot of older pre-radial Hayabusa’s and spares about.

Offline seth

  • Forum Donor 2020
  • Needs to get out more
  • ******
  • Location: Near Perth in southern Scotland
  • Posts: 5450
  • Country: scotland
  • Total likes: 3393
  • Gender: Male
  • Near to Perth in Scotland
Re: Wanted Clutch lever
« Reply #3 on: Friday, 27 May 2022, 07:27 pm »
I used a 600 bandit adjuster 7 settings on a standard gsx1400 lever the adjuster was then filed down to give a shorter span for emma's bike as she has smaller hands and found the span on minium to large .
Its now done 62000 miles like it .
I could modify 1 here and send it to to if you like
The clutch switch still works as it should  :cheers:
only a slightly modified gsx1400
oh and a standard one too

Sethbot Postwhore


SMF spam blocked by CleanTalk