Power Commander PC-V Grounding

[V_i_c_i]

On old forum was photo (from Maverick I think) where connect PC V grounding direct to ECU grounding.
Have someone from you this photo downloaded? I do not want it search in wiring diagram.

[gsxbarmy]

Hey Vici, why not pm Maveric direct - he's on here now buddy....

[seth]

then get him to share on here too 

as this information would be very useful

[V_i_c_i]

Hey Vici, why not pm Maveric direct - he's on here now buddy....

I missed this info, when I started this topic. Is great that another one as Maverick from old forum is here. 

[Maveric]

Hi vici
I'm still trying to find the pic if i'm not find it tomorrow i can always go out in the cave and take a new one  . See if i can have it done by  sunday .

Cheers Maveric

[Maveric]

Hi Vici
Here are the pic's of the grounding point close to the ECU on K5-K7 taken when i started to tryout where so ignore my isolating solution  .

Today i have done it more professional If it's hard to see witch wire it is black with a a white trace.

Cheers Maveric

[gsxbarmy]

Power Commander V Grounding - is this what you mean 

[V_i_c_i]

You are the best Maverick. Thank you.

[seth]

fantastic
cheers maverick 

[V_i_c_i]

One photo for you Maverick for my peace of mind. Can you please check my wiring. Maybe it will help other. Thank you much.



But how to connect ****ing TPS wire. There is no room for my fingers.  You connected it near TPS with the help of "spy connector" supplied in the kit with PC V?
There is next option. Connect this ****ing wire direct to ECU. Because this pink wire with black dots is going directly to ECU. But how to remove this ****ing grey wire without too much damage the insulation of the wiring harness. 
If succeeded this second version, there can be inserted some nice 2 PIN sealed connector for this ****ing wire and "your" grounding wire. That would be almost professional solution. 

[Blubber]

You have to take the pink/ grey tps connector of the pcv harness apart.

You push the grey bit on the correct wire ( out of sight, somewhere under the tank)

Screw on the pink tube and then screw in the piece with the wire.

I have the instructions in the shed... I will post a picture of it soon.

[Blubber]

Hope it's clear enough

[V_i_c_i]

So I modify PC V wiring harness and take out TPS wire on the same place as ground.



And connect TPS direct to ECU. Now just fit some 2 PIN connector to PC V and to ECU. 

[gsxbarmy]

I've now stickied this thread as a Tech Tip, as if others want to do this mod it will save searching for it. Thanks to all who have (and continue to) contribute 

[seth]

thanks dave