Ignition Advancer Modification - Step 6
Previous Image | Next Image
Description: 6.   Once happy with the filing job take back to the bike to see if you have done enough, I marked the standard position first (on the top of the plate) then another with the advance. With my bike the backing plate would only go about 3.75mm as it then hits on the bottom. 3.75mm is far enough for me as 1mm equals 1 degree when measured at the top of the plate, not on the filed holes. Check out the last photo for details
Stats:
Total Favorities: 0 View Who Favorited
Filesize: 67.6kB
Height: 606 Width: 804
Posted by: gsxbarmy Wednesday, 25 January 2017, 09:56 pm

Total Likes: 0
Share


Image Linking Codes
BB Code

Comments (0)




Powered by SMF Gallery Pro

anything